Desktop Management Interface (DMI)


Definition of Desktop Management Interface in the Network Encyclopedia.

What is DMI (Desktop Management Interface)?

Desktop Management Interface, also knowns as DMI, is a standard for managing desktop systems developed by the Desktop Management Task Force (DMTF). Using the Desktop Management Interface (DMI), information can be automatically collected from system components such as network interface cards (NICs), hard disks, video cards, operating systems, and applications that are compliant with the DMI standard.

DMI (Desktop Management Interface)
DMI (Desktop Management Interface)

DMI was designed to be operating system–independent and protocol-independent and was designed for use on local systems that do not have a network installed. DMI can be mapped to Simple Network Management Protocol (SNMP).




Note that DMI itself does not specify a protocol for managing systems over the network; instead, it must use an existing network management protocol such as SNMP to send and receive information over the network.

What is DMI (Desktop Management Interface)?

DMI is similar in design to SNMP. Each component to be managed must have a Management Information Format (MIF) file that specifies the location of the component, name of vendor and model, firmware revision number, interrupt request line (IRQ), I/O port address, and so on. MIF files are formatted as structured ASCII flat-file databases; the Desktop Management Task Force has defined several standard MIFs including the Desktop System MIF file, the Adapter Card MIF file, and the Printer MIF file.



DMI service layer software running on the desktop collects information from DMI-enabled components and stores this information in the appropriate MIF file. The service layer thus acts as an intermediary between the DMI-enabled components and the DMI management application, and it coordinates shared access to the various MIFs installed on the desktop system. DMI management applications can then query the service layer on the desktop to obtain the various system components and applications from these MIF files. The service layer allows the management layer to interact with the MIFs by using commands such as

  • Get, which obtains information from a MIF
  • Event, which alerts the management application when certain events occur
  • Set, which modifies the contents of a MIF

One advantage of DMI over SNMP is that DMI management applications can access MIF files even when they have no prior information about them.

DMI management applications include Intel’s LANDesk and Microsoft Systems Management Server (SMS). SMS uses standard DMI 4.5 MIF files to expose inventory data for systems it manages and then stores this information in a Microsoft SQL Server database.

Web-Based Enterprise Management

The newer Web-Based Enterprise Management (WBEM) initiative from the DMTF proposes the Common Information Model (CIM) as a common abstraction layer for unifying the various existing data providers for system and network management, including DMI and SNMP. Microsoft has implemented WBEM into the Windows 2000 operating system as the Windows Management Instrumentation (WMI).



Editor

Articles posted after being checked by editors.

Recent Content

link to Simplex

Simplex

Simplex is a form of communication in which signals are sent in only one direction. This is different from duplex transmission, in which signals can simultaneously be sent and received by a station, and from half-duplex transmission, in which signals can be sent or received but not both at the same time.
link to Full-duplex

Full-duplex

Full-Duplex is a mode of communication in which data is simultaneously transmitted and received between stations. Full-duplex communication is twice as fast as half-duplex communication, and typically uses two separate pairs of wires (or two channels for wireless networking) for supporting simultaneous transmission and reception by a host.